iMX9 WiFi and Bluetooth Antennas Set

This antennas set provides all the necessary parts to explore full wireless potential of the iMX93 Industrial Module and iMX91 Industrial Module. Its performance was tuned for frequency range, where common wireless network protocols such as WiFi, Zigbee or Bluetooth operate.
Available on June 10, 2024
Let’s talk.

These antennas enable quick and easy evaluation of development kit radio capabilities. They are used in combination with either the WiFi/Bluetooth module assembled on the COM or wireless cards plugged into the baseboard sockets. Metal brackets placed on the carrier board provide secure antennas mounting points.

For optimal coverage in upper bands, the antennas use an omni-directional radiation pattern allowing efficient operation in frequency range from 2.4 to 6 GHz. They are well-suited to implement various WLAN protocols and meet all European, US and Japanese regulations.

The extension RF cables utilize RP-SMA female bulkhead to right angle IPEX MHF1 plugs. The cables provide enough length to be used for customers' own carrier boards prototyping.

• recommended frequency range:
     • 2.4 - 2.5 GHz
     • 4.9 - 5.875 GHz

• antenna gain:
     • 2.1 dBi (2.45 GHz)
     • 2.4 dBi (4.9 GHz)
     • 2.6 dBi (5.25 GHz)
     • 3.4 dBi (5.875 GHz)

• antenna polarization: vertical, omni-directional

• nominal impedance: 50 Ohms

• antenna length (180° straight): 95.9 mm

• antenna length (90° angled): 75.4 mm

• antenna connector: RP-SMA

• input RF connector: IPEX MHF1

• RF extension cable length: 182 mm

• RF extension cable thickness: 1.13 mm

Detailed specification, datasheets, software and more, can be found in the following documents and webpages:

• antenna datasheet
• RF extension cable datasheet
• Voipac Downloads